Brazed Heat Exchangers

The brazed plate heat exchanger is the most advanced form of the compact plate heat exchanger especially designed for a wide range of applications in both process and hydronic applications. These heat exchangers are also widely used for refrigeration applications as evaporators, condensers and sub-coolers

An extremely high heat transfer coefficient is attained due to the flow characteristics in each channel. A specially designed and tested chevron pattern causes a turbulent flow of the fluid resulting in higher heat transfer.

Domestic Hot Water

Radiant Floor

Snow Melt

Advantages of the Brazed Heat Exchanger

Compact:
Due to the high efficiency of the brazed plate heat exchangers, these heat exchangers are often half the size of conventional shell & tube heat exchangers. The smaller footprint also makes it easier to be installed on skid systems and portable equipment packages.

High Efficiency:
Due to the turbulent flow of the fluid in the channels, the heat transfer coefficients of our brazed plate heat exchangers are 3-5 times higher than that of a conventional Shell & Tube heat exchanger for a similar application.

Rugged Construction:
The brazed plate heat exchanger is brazed using 99.9% copper. The copper provides a strong bond when heated in a special furnace, keeping the plates bonded together. The heat exchangers have a hig pressure-temperature rating. All our copper brazed heat exchangers are rated for 413psig, 406 degrees..

Closer Approach
The brazed plate heat exchanger can provide a temperature approach of 1 degree F. This allows for maximum utilization of waste heat recovery.

24-Hour Service:
We can be reached on a 24 hour basis, 7 days a week for any replacement of heat exchangers on an emergency basis